現在國內很多廠家都能這種抗倍特板，并相應的出現了相應配套抗倍特板深加工的企業，因?yàn)檫@種材料比較貴，后來市場上出現了便宜的二代抗倍特板和更便宜的三代抗倍特板，二代抗倍特板和三代抗倍特板的工藝和一代抗倍特板工藝完全不一樣，業內人士都認為是假抗倍特板，板材在防潮性，耐磨性，耐撞擊性等主要指標上都比一代板要差。那么，我們?cè)趺磪^(qū)分識別這些抗倍特板呢？富美家抗倍特廠家為您解說。

Now many domestic manufacturers can use this kind of multiplayer resistant special plate, and there are corresponding enterprises for further processing of matching multiplayer resistant special plate. Because this material is expensive, cheap second-generation multiplayer resistant special plate and cheaper third-generation multiplayer resistant special plate appeared in the market later. The process of second-generation multiplayer resistant special plate and third-generation multiplayer resistant special plate is completely different from that of the first generation multiplayer resistant special plate. People in the industry believe that it is a fake multiplayer resistant special plate, and the plate is moisture-proof and wear-resistant, The main indexes such as impact resistance are worse than those of the first generation board. So, how can we distinguish and identify these anti multiplier plates?The manufacturer of Fumeijia Kangbeite will explain to you

正宗的抗倍特板(俗稱酚醛樹脂板)是由裝飾色紙含浸三聚氰胺樹脂，加上多層黑色或褐色牛皮紙含浸酚醛樹脂層疊后，再用模板在高溫（150℃）高壓（1430psi）的環境下壓制而成的，厚度可依需要調整牛皮紙的張數，從1.6mm到25mm皆可制作。材料密度為1450kg/m3左右。

Authentic MP board (commonly known as phenolic resin board) is made of decorative colored paper impregnated with melamine resin, plus multiple layers of black or brown kraft paper impregnated with phenolic resin, and then pressed with templates under high temperature (150 ℃) and high pressure (1430psi). The number of sheets of kraft paper can be adjusted according to needs, and can be made from 1.6mm to 25mm. The material density is about 1450kg/m3.

1.工藝不一樣，二代抗倍特板和三代抗倍特板是密度板的工藝，它不是牛皮紙壓出來的，是木纖維加膠水壓出來的。

1. The process is different. The second generation and the third generation of MDF are the process of density board. They are not made from kraft paper, but from wood fiber with glue and water pressure.

2.板材密度不一樣，一代板密度1450kg/m3左右，密度比較大，放在水里立即下沉，下沉速度很快。二代抗倍特板板材密度1100kg/m3，放在水里緩慢下沉，三代抗倍特板密度900kg/m3，不會下沉。

2. The density of the boards is different. The density of the first generation boards is about 1450kg/m3, which is relatively high. When they are placed in water, they sink immediately and quickly. The density of the second generation multiplayer resistant special plate is 1100kg/m3, which will sink slowly in water. The density of the third generation multiplayer resistant special plate is 900kg/m3, which will not sink.

3.味道不一樣，一代抗倍特板截面沒有味道，二代和三代抗倍特板截面有膠水甲醛的味道。

3. The taste is different. The cross section of the first generation of multiplayer laminate has no taste, and the cross section of the second and third generation multiplayer laminate has the smell of glue formaldehyde.

4.截面手感不一樣，一代抗倍特板鋸開后的截面摸上去手感光滑，二代抗倍特板鋸開后的截面摸上去手感比較粗糙，三代抗倍特板截面摸上去很粗糙。

4. The cross section feel is different. The cross section of the first generation anti multiplier plate sawn feels smooth, the cross section of the second generation anti multiplier plate sawn feels rough, and the cross section of the third generation anti multiplier plate feels rough.

5.顏色不一樣，一代抗倍特板截面是黑色的，二代抗倍特截面顏色為黑灰色，三代抗倍特截面顏色又是灰白色。

5. The color is different. The cross section of the first generation anti multiplier plate is black, the cross section of the second generation anti multiplier plate is black gray, and the cross section of the third generation anti multiplier plate is gray white.

怎么區分識別一代二代三代抗倍特板？我們可以從五個方面進行區分，當然具體的細節也要多加注意，您有購買需求的話隨時來我們網站http://m.kcrft.cn進行咨詢！

How to distinguish and identify the first generation, second generation and third generation anti multiplier plates? We can distinguish from five aspects. Of course, pay more attention to the specific details. If you have a purchase demand, please come to our website at any time http://m.kcrft.cn Consult!